中文
English
Tera2063 USB 3.1 cable BERT
Description
The Tera2063 is USB 3.1, USB 3.0 cable BERT, provide BER test/debug solution for R&D engineer and manufacture.
The Tera2063 could work mother board with daughter card. User could change daughter card for USB Type C cable volume testing.
? 9V power supply, could support remote control in lab.
? Support different PRBS pattern, include PRBS7/PRBS11/PRBS15/PRBS23/PRBS31
? Support real-time BER report for 12 channel (1.25G/2.5G/3.4G/5G/5.4G/6G/8.1G/8.5G/10G/10.7G/11.3G/12G/12.8G )
? Support Alarm-history function, record alarm history at long-term testing
? Support trigger clock output for the eye diagram monitor.
Tera2063 Physical Interface
Power supply
Tera2063 adapter 9V DC power supply. Power supply must not exceed 9V, higher than 9V will damage the analyzer permanently.
Console Interface
Tera2063 use the COM for the remote control and test function.
Traffic Interface
Current Tera2063 have one type daughter card, support USB 3.1 Type C connector .
Support three cable simultaneous tests per daughter card.
|
Parameter |
Min |
Typical |
Max |
Unit |
Note |
|
Bit rate |
1.25 |
|
12.8 |
Gb/s |
|
|
Output Swing |
350 |
|
800 |
mVppd |
100Ω differential load peak-peak differential |
|
Jitter（P-P） |
|
|
22.5 |
Ps |
|
|
Jitter（RMS） |
|
2.0 |
3.0 |
Ps |
PRBS^23-1 data at 10 Gbps |
|
Rising/Fall time |
18 |
|
|
Ps |
|
|
Pre-emp |
|
|
12 |
dB |
Post 1 Cursor at Max Swing Setting |
|
Input Swing (at Device) |
100 |
|
1000 |
mV |
Peak-peak differential |
|
Maximum Loss Compensation |
|
25 |
|
dB |
9.95 Gb/s at 10e-12 BER |
|
Input Jitter Tolerance |
|
0.5 |
|
UI |
pre-emphasis |
|
Power supply |
6 |
9 |
9.45 |
V(DC) |
|
|
Power dissipation |
|
|
10 |
W |
|
|
Temperature |
-5 |
|
55 |
oC |
|
|
Store |
-10 |
|
70 |
oC |
|
|
Humility |
5 |
|
90 |
% |
Non-Condensing |
|
RF interface |
K（2.92mm），Compliant SMA |
|
|||
notes: Measurements based on PRBS^23-1 data at 9.95 Gbps.
Trigger Clock Interface
Tera2063 have one trigger clock for the all group port.
